Page tree
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Next »

Summary

VPN (Virtual Private Network) is used when you are off campus but need to access resources that require an on-campus network connection (such as Argos, Banner, and the Q Drive). Only faculty and staff members have access to VPN resources at Bethel. This article gives instructions for installing VPN on Windows 10 using Firefox.  

Installing VPN

Note: You must use either Firefox or IE for the following steps.

  1. Follow the instructions for Requesting a Group, and request the group "VPN Users"

  2. If you are ON campus, navigate to https://vpn-setup.bethel.edu/

  3. If you are OFF campus, navigate to https://vpn.bethel.edu/

  4. Log in using your Bethel Username and Password.



  5. Click Continue to agree to the Acceptable Use Policy.



  6. Select AnyConnect from the bar at the left hand side of the screen.



  7. Click Start AnyConnect.



  8. The Cisco AnyConnect VPN Secure Mobility Client will go through a series of tests. Perform a manual installation by clicking on the AnyConnect VPN link.



  9. Another window will appear. Click Save File



  10. Follow the installer prompts. Click Next.






  11. You have successfully installed the Cisco AnyConnect VPN Client.

 

Please note that if you are installing VPN on Bethel campus, you will not successfully connect to VPN until your computer is off the Bethel network.

Additional VPN Information

For assistance in using VPN, please reference this Article

  • No labels